Item# PB-25300
PROACTIVE ENVIRONMENTAL PRODUCTS®
60 Amp Mobile Battery Pack
Spark Free!
OSHA Approved!!!
"Limit weight you lift to no more than 50 pounds. When lifting loads heavier than 50 pounds, use two or more people to lift the load"
Ergonomics eTool: Solutions for Electrical Contractors - Materials Handling: Heavy Lifting (osha.gov)
Disclaimer
Not to be used as a rental
Now For International Use: The International Voltage Converter gives the 60 Amp Mobile
Battery Pack the ability to
operate on 220 volts direct.
(Please Note:
The International
Voltage Converter
is sold separately
upon request)
Included Adaptors:
Type A: United States, Canada, Mexico, Japan
Type G: United Kingdom, Malta, Malaysia, Singapore, Ireland
Type I: Australia, New Zealand, China, Argentina
Type L: Chile, Italy
%20-.png)
Proactive Environmental Products Int'l 60 AMP Mobile Battery Pack is a compact, durable and portable 12 volt DC system specifically designed for most of Proactive’s 12 volt DC pumps. This self-contained, rechargeable 12-volt system can very easily replace gas generators or your old automotive battery.
Safety And Peace Of Mind
The 60 AMP Mobile Battery Pack is great for groundwater and surface water sampling applications that require "no spark" at the power source. The 60 Amp Mobile Battery Pack is as easy as 1..2..3... First, The field technician confirms that the "master power switch" is turned to the "off" position. Second, the field technician hooks up the Proactive 12 volt DC pump to the 60 Amp Mobile Battery Pack; Positive connection first to the 60 Amp Mobile Battery Pack and then negative connection from the pump to the negative terminal on the 60 Amp Mobile Battery Pack. Thirdly, the field technician turns the "master power switch" to the "on" position, energizing the 60 Amp Mobile Battery Pack. By following this exact sequence of events will "practically eliminate" a spark from the Proactive 60 Amp Mobile Battery Pack.
Please note this unit is not ATEX certified.
Why Is The 60 AMP Mobile Battery Pack Better Than An Automotive Battery?
A car battery is measured in (CCA) or Cold Cranking Amps. The definition of the Cold Cranking Amperage (CCA) of an automotive battery is the amount of current a given battery can deliver for 30 seconds at zero (0) degrees Fahrenheit without dropping below a specified cutoff voltage (manufacturer-specific, but usually 10.5 volts). In short, an automotive battery will deliver a high current for a short period of time, like starting a vehicle, and it is not designed to deliver high amp output over a long period of time. Furthermore, an automotive battery is not engineered to be fully discharged. This discharging and then recharging an automotive battery only a few times will result in battery failure.
In short, an automotive battery could be used to power several of Proactive 12 volt DC pumps but, the run time using an automotive battery compared to the 60 Amp Mobile Battery Pack is actually a 50% difference in runtime factor. Some of Proactive's 12-volt pumps may require higher demand currents that will cause extra losses in the internal resistance of a standard automotive battery to go up. Therefore, more power is lost heating up the battery, for instance, resulting in a rapid battery discharge.
Why Is Proactive's 60 AMP Mobile Battery Pack Better Than A Gas Generator?
Let’s face it, gas generators produce noxious fumes harmful to the technician and our environment. And the gas fumes may also contaminate your groundwater samples depending on which way the wind is blowing. Gas is cumbersome and very dangerous to transport, not to mention, the inconvenience of transporting and filling the gas generator. Furthermore, you practically need to be a weightlifter to maneuver a gas generator out of your field sampling truck, which can lead to low back strain.
Save Time And Money In The Field
Get the job done faster by eliminating battery failure and constant recharging of automotive batteries. And with the 60 Amp Mobile Battery Pack saving your client time and money is always a great thing! When it comes to remote groundwater and surface water sampling events, the last thing you want to be is stuck out in the middle of nowhere with a dead battery. That is why Proactive always recommends purchasing more than one unit. While one unit is being used, the other unit is being charged. The field technician can then rotate the 60 Amp Mobile Battery Packs for those extended water sampling events. And the great benefit of Proactive's 60 Amp Mobile Battery Pack that it can be charged in your vehicle with the purchase of the 12 Volt DC to 120/220 Volt AC Power Inverter (Item# PERRY-37300). And of course, The 60 Amp Mobile Battery Pack can be charged in the office, the hotel room, or any location where 120 volts AC is available with the provided charger. The 60 Amp Mobile Battery Pack will save you and your client time and money!
Benefits and Features:
-
Easy to read voltage output display will let the technician know exactly how much voltage is remaining
-
Ergonomic carrying handle
-
USB plug output for charging cell phone
-
Built from high-impact plastic eliminates rusting
-
Incorporates 60 Amp AGM non-spillable battery
Removable on/off switch
(for unauthorized use)
50 AMP breaker
Two USB plug output (for charging cell phones and tablets)
Easy to read
voltage output
Specifications:
INTERNAL BATTERY CHARGER: 8 AMP
MEASUREMENTS: WIDTH 16 1/2" X DEPTH 8 1/2" X HEIGHT 13 1/2"
WEIGHT: 50 POUNDS
Products that are Recommended:
Tubing (Water Sampling)
Disposable Wastewater/Groundwater Filters
International Voltage Converter
60 Amp Mobile Battery Pack
can be used with the following Pumps:
Standard Pump Line
High Performance Pump Line
WaterSpout Pump Line
Supernova Pump Line
Abyss Pump Line
Abyss 300 Pump Line
Abyss Elite Pump Line
Drum Pump
Poseidon Pump Line
Frontier Pump Line
Stainless Steel Pumps
Storm® 50 Pump
Electra® Peristaltic Pump
Athena® Peristaltic Pump
Type A
• Mainly used in the USA,
Canada, Mexico & Japan
• 2 pins
• Not grounded
• 15 A
• Almost always 100–127 V
• Socket compatible with plug type A
Included with
the Int'l Voltage Converter
Type B
• Mainly used in the USA, Canada, Mexico & Japan
• 3 pins
• Grounded
• 15 A
• Almost always 100–127 V
• Socket compatible with plug types A & B
Type C
• Commonly used in Europe,
South America & Asia
• 2 pins
• Not grounded
• 2.5 A
• Almost always 220–240 V
• Socket compatible with plug type C
Type D
• Mainly used in India
• 3 pins
• Grounded
• 5 A
• 220 – 240 V
• Socket compatible with plug type D (partial and unsafe compatibility with C, E & F)
Type E
• Primarily used in France, Belgium, Poland, Slovakia
& Czechia
• 2 pins
• Grounded
• 16 A
• 220 – 240 V
• Socket compatible with plug types C, E & F
Type G
• Mainly used in the United
Kingdom, Ireland, Malta,
Malaysia & Singapore
• 3 pins
• Grounded
• 13 A
• 220 – 240 V
• Socket compatible with plug type G
Included with
the Int'l Voltage Converter
Type F
• Used almost everywhere in Europe & Russia, except for the UK & Ireland
• 2 pins
• Grounded
• 16 A
• 220 – 240 V
• Socket compatible with plug types C, E & F
Type H
• Used exclusively in Israel,
the West Bank & the Gaza
Strip
• 3 pins
• Grounded
• 16 A
• 220 – 240 V
• Socket compatible with plug types C & H (unsafe compatibility with E & F)
Type I
Included with
the Int'l Voltage Converter
• Mainly used in Australia, New Zealand, China & Argentina
• 2 or 3 pins
• 2 pins: not grounded
3 pins: grounded
• 10 A
• 220 – 240 V
• Socket compatible with plug type I
Type J
• Used almost exclusively in Switzerland & Liechtenstein
• 3 pins
• Grounded
• 10 A
• 220 – 240 V
• Socket compatible with plug types C & J
Type K
• Used almost exclusively in Denmark & Greenland
• 3 pins
• Grounded
• 16 A
• 220 – 240 V
• Socket compatible with plug types C & K (unsafe compatibility with E & F)
Type L
• Used almost exclusively in Italy & Chile
• 3 pins
• Grounded
• 10 A & 16 A
• 220 – 240 V
• 10 A socket compatible with plug types C & L (10 A
version) / 16 A socket compatible with plug type L (16 A version)
Included with
the Int'l Voltage Converter
Type M
• Mainly used in South Africa
• 3 pins
• Grounded
• 15 A
• 220 – 240 V
• Socket compatible with plug type M
Type N
• Used in Brazil and South Africa
• 3 pins
• Grounded
• 10 A & 20 A
• 100 – 240 V
• Socket compatible with plug types C & N
Type O
• Used exclusively in
Thailand
• 3 pins
• Grounded
• 16 A
• 220 – 240 V
• Socket compatible with plug types C & O (unsafe compatibility with E & F)
Pump Water Discharge Rate at 50%
Pump Water Discharge Rate (For Example: Low Flow Sampling)
at 100% At Maximum Depth (Fractional Flow™)
PLASTIC CYCLONE
11 HOURS 22 HOURS
PLASTIC MINI-TYPHOON
6 HOURS 12 HOURS
PLASTIC TYPHOON
5.5 HOURS 11 HOURS
PLASTIC TEMPEST
4 HOURS 8 HOURS
PLASTIC MINI-MONSOON
3 HOURS 6 HOURS
PLASTIC SUPER TWISTER
3 HOURS 6 HOURS
PLASTIC TORNADO
3 HOURS 6 HOURS
DRUM PUMP
16 HOURS N/A
WATER SPOUT I COMPLETE
6 HOURS 12 HOURS
WATER SPOUT II COMPLETE
4 HOURS 8 HOURS
PLASTIC MEGA-TYPHOON
2 HOURS 4 HOURS
PLASTIC TSUNAMI
2 HOURS 4 HOURS
PLASTIC MONSOON
1 HOUR 2 HOURS
PLASTIC HURRICANE
1 HOUR 2 HOURS
PLASTIC MEGA-MONSOON
1 HOUR 2 HOURS
SUPERNOVA 70
4.5 HOURS 9 HOURS
SUPERNOVA 120
1.5 HOURS 3 HOURS
POSEIDON 60
4 HOURS N/A
POSEIDON 80
2 HOURS N/A
POSEIDON 100
2.5 HOURS N/A
Pump Water Discharge Rate at 50%
Pump Water Discharge Rate (For Example: Low Flow Sampling)
at 100% At Maximum Depth (Fractional Flow™)
FRONTIER 60
4 HOURS N/A
FRONTIER 80
2 HOURS N/A
FRONTIER 100
2.5 HOURS N/A
ABYSS
11 HOURS 22 HOURS
ABYSS SLIMLINE
11 HOURS 22 HOURS
ABYSS 300
8.5 HOURS 17 HOURS
ABYSS 300 SLIMLINE
8.5 HOURS 17 HOURS
ATHENA
14.5 HOURS 29 HOURS
ALEXIS
14.5 HOURS 29 HOURS
PEGASUS
AVAILABLE SOON
PVC PLASTIC SAMPLE CHAMP
1 HOUR 2 HOURS
SS MINI-MONSOON XL 60
4 HOURS N/A
SS MINI-MONSOON XL 80
2 HOURS N/A
SS MINI-MONSOON XL 100
2.5 HOURS N/A
SS SAMPLE CHAMP XL
1 HOUR 2 HOURS
SS MEGA-TYPHOON XL
1 HOUR 2 HOURS
SS MONSOON XL
1 HOUR 2 HOURS
SS HURRICANE
1 HOUR 2 HOURS
SS MEGA-MONSOON XL
1 HOUR 2 HOURS